庆旋减速机-中国减速机行业优质供应商

悬挂式齿轮减速机

PRODUCT DISPLAY

科技成就未来 服务创造价值
prevnext

悬挂式齿轮减速机

额定功率:1.1~193KW
许用扭矩:180~17000N.m
输入转速:750~1500
输出转速:25~300
安装形式:轴装
  • 基本资料
  • ZGY悬挂式齿轮减速机是我公司开发的一种硬齿面减速机,齿轮采用高强度低碳合金钢。齿轮精度高,硬度高,体积小,车载能力大,效率高,结构简单,安装维护方便等特点,并可配置防倒转装置。
    机体表面凹凸具有散热作用,吸振强,低温升,低噪音。
    混凝土搅拌站斜皮带上料用减速机ZGY 
      5、该电机关键零部件采用了高耐磨材料,并经过特种热处理,具有加工精度高,传动平稳、体积小承载能力大、寿命长等特点。   6、该减速机可配置各种类电机,形成了机电一体化,完全保证了产品使用质量特征ZGY减速机ZGY悬挂式减速机
     4、该机传动精度高,特别适应在有频繁启动的场合工作,可连接各类减速机及配置各类型电机驱动,可安装在90度传动操作位置。
      3、该机密封性能好,对工作环境适应性强。      悬挂式齿轮减速机硬齿面减速机型号: ZGY246.35 ZGY322.45 ZGY322.40 ZGY364.45 ZGY364.50 ZGY364.55 ZGY434.50 ZGY434.55 ZGY434.60  ZGY498.60 ZGY498.70
    ZGY550.70 ZGY550.85 ZGY625.80 ZGY625.90 ZGY710.100  ZGY710.125   
    ZGY850.125 ZGY850.135
    额定功率:1.1~193KW
    许用扭矩:180~17000N.m
    输入转速:750~1500
    输出转速:25~300
    安装形式:轴装

    一:产品简介
      皮带输送机械驱动系统是由传动滚筒,ATA悬挂式齿轮减速机,扭力臂,皮带轮及电机组成,其动力由电动机通过皮带轮传递给减速机,减速机再通过空心轴传递给传动滚筒,并通过扭力臂固定减速机,可配置防倒装置。该系统具有安装,适用维护方便等特点
     二:适用范围 
         农业,商业,邮电业,食品工业,烟草工业,汽车工业,水泥工业,采矿业,搅拌站的皮带输送系统适用及维护1:开机前必须将减速机加入N159或N220中极压工业齿轮油,注油至减速机示油器中间位置; 2减速机运行三个月后,需要更换润滑油,注意必须将机内杂物冲净后,方可加入新轴;3减速机空心轴端与传动滚筒端必须用压盖板及防送螺丝紧固.4减速机皮带轮与电机皮带轮安装时必须保持平行,皮带的松紧度要适中。


    ZGY suspension gear reducer is a hard tooth surface reducer developed by our company, and the gears are made of high-strength low-carbon alloy steel. The gear has the characteristics of high precision, high hardness, small size, large vehicle capacity, high efficiency, simple structure, convenient installation and maintenance, and can be equipped with an anti reverse device.

    The uneven surface of the body has a heat dissipation effect, strong vibration absorption, low temperature rise, and low noise.
    ZGY reducer for inclined belt feeding in concrete mixing plant

    5. The key components of the motor are made of high wear-resistant materials and undergo special heat treatment, which have the characteristics of high machining accuracy, smooth transmission, small volume, large load-bearing capacity, and long service life. 6. This reducer can be configured with various types of motors, forming mechatronics integration, fully ensuring the quality characteristics of product use. ZGY reducer ZGY suspension reducer

    4. This machine has high transmission accuracy and is particularly suitable for working in situations with frequent starts. It can be connected to various types of reducers and configured with various types of motor drives. It can be installed in a 90 degree transmission operation position.

    3. The machine has good sealing performance and strong adaptability to the working environment. Hanging gear reducer hard tooth surface reducer model: ZGY246.35 ZGY322.45 ZGY322.40 ZGY364.45 ZGY364.50 ZGY364.55 ZGY434.50 ZGY434.55 ZGY434.60 ZGY498.60 ZGY498.70

    ZGY550.70,ZGY550.85,ZGY625.80,ZGY625.90,ZGY710.100,ZGY710.125,ZGY850.125 ZGY850.135

    Rated power: 1.1~193KW
    Permissible torque: 180~17000N. m
    Input speed: 750~1500
    Output speed: 25-300
    Installation form: shaft mounted
    1: Product Introduction
    The belt conveyor mechanical drive system is composed of a transmission drum, an ATA suspension gear reducer, a torque arm, a pulley, and an electric motor. The power is transmitted from the electric motor to the reducer through the pulley, which is then transmitted to the transmission drum through a hollow shaft. The reducer is fixed by the torque arm and can be equipped with an anti overturning device. This system has the characteristics of easy installation, applicability, and maintenance

    2: Applicable scope
    Application and maintenance of belt conveyor systems in agriculture, commerce, postal and telecommunications, food industry, tobacco industry, automotive industry, cement industry, mining industry, and mixing stations: 1. Before starting up, the reducer must be added with N159 or N220 medium extreme pressure industrial gear oil, and filled with oil to the middle position of the reducer oil indicator; After running the gearbox for three months, it is necessary to replace the lubricating oil. It is important to flush out any debris inside the gearbox before adding a new shaft; The hollow shaft end of the reducer and the transmission drum end must be fastened with a pressure cover plate and anti feeding screws. When installing the reducer pulley and motor pulley, they must be kept parallel, and the tightness of the belt must be moderate.

    CopyRight © 上海庆旋减速机有限公司 版权所有
    ICP备案号:沪ICP备09011552号-5