庆旋减速机-中国减速机行业优质供应商
x
概述：
主要由压紧的主动轮装置、摩檫传动机构、调速控制机构组成。
1.高强度：在加冲击负栽或机器逆转时，本机性能可靠，能精确转动，屋后座历。
2.变速范围大：变速比均为1：5，即输出转速可在1：45至1：7.25之间任意变化。
3.调速精度高：调速精度为1--0.5转。
4.性能稳定：本机的传动部件都经过特殊的热处理，精密度加工摩檫部位，润滑良好，运行平稳、噪音低、寿命长。
5.同轴结构：输入轴、输出轴同向旋转，体积小、重量轻。
6.组合能力强：本机可与各种类型减速机组合，实现低转速，大扭规的变速效果。
7.在允许负载的情况下，调定的转速恒定；
8.全机密封，可适用于潮湿、多尘、有轻度腐蚀性的工作环境。
技术参数：
功 率：0.18KW～7.5KW
转 矩：1.5N·m～2062N·m
变速范围：
1.基本型：200-1000r/min
2.变速机带一级齿轮减速（i=2.5-5）：40-200r/min
3.变速机带二级齿轮减速（i=7.1-25）：8-140r/min
4.变速机带三级齿轮减速（i=42-100）：2-23.5r/min
It mainly consists of a compressed driving wheel device, a friction transmission mechanism, and a speed control mechanism.
1. High strength: When subjected to impact loading or machine reversal, this machine is reliable in performance, capable of precise rotation, and can be seated behind the house.
2. Wide speed range: The gear ratios are all 1:5, which means the output speed can vary freely between 1:45 and 1:7.25.
3. High speed regulation accuracy: The speed regulation accuracy is 1-0.5 revolutions per minute.
4. Stable performance: The transmission components of this machine have undergone special heat treatment, precision machining of friction parts, good lubrication, smooth operation, low noise, and long service life.
5. Coaxial structure: The input shaft and output shaft rotate in the same direction, with small volume and light weight.
6. Strong combination ability: This machine can be combined with various types of reducers to achieve low speed, large torque and variable speed effects.
7. Under allowable load conditions, the set speed remains constant;
8. Fully sealed, suitable for damp, dusty, and slightly corrosive working environments.
Technical parameters:
Power: 0.18KW~7.5KW
Torque: 1.5N · m~2062N · m
Variable speed range:
1. Basic type: 200-1000r/min
2. Transmission with primary gear reduction (i=2.5-5): 40-200r/min
3. Transmission with secondary gear reduction (i=7.1-25): 8-140r/min
4. Transmission with three-stage gear reduction (i=42-100): 2-23.5r/min
